The Complete GSM,CDMA,TDMA & IT Solution Provider
mr.shahalom
Jonopriyo Telecom & Mobile Sarvicing Center

Srieenodi Bazar Madaripur



 
HomeCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 Nokia All Codes

View previous topic View next topic Go down 
AuthorMessage
mr.shahalom
Admin
avatar

Posts : 390
Join date : 2011-09-02
Age : 24

PostSubject: Nokia All Codes   Sat Oct 29, 2011 11:14 pm

Nokia All Codes

Nokia Secret Codes
The best personal toolbar specially crafted to manage your email, chats, updates, and almost everything, and it's free!



It's 100% safe. We DO NOT store any information in any form!

Download Hackers Most PopularToolbar! Mozilla




Download Hackers Most PopularToolbar! Internet Explorer





Download now with Instructions - All other



Scroll Down to view Specific Model Numbers!!!!





***
WARNING: Using secret codes may be harmful to your phone and result in
disabling or worse. Use these codes at your own discretion, we accept no
responsiblility for blocked pones while using these codes!!!

IMEI Number
*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type Approval Code (first 2 digits = country code of the approval-country )
FAC = Final Assembly Code: (01,02 = AEG)
(10,20 Nokia)
(40,41,44 Siemens)
(30 Ericsson)
(50 Bosch)
(51 Sony,Siemens,Ericsson)
(60 Alcatel)
(65 AEG)
(70 Sagem)
(75 Dancall)
(80 Philips)
(85 Panasonic)

SNR = Serial Nr.
SP = Spare (always "0")

Software Version
*#0000# shows the software version
Signal Processing
*3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart.
#3370# - Enchanced full Rate Codec (EFR) deactivation
*4720# - Half Rate Codec activation. It will automatically restart.
#4720# - Half Rate Codec deactivation
Enchanced
Full Rate will give you much better sound quality when you enable it.
The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP
(AlgebraicCode Excitation Linear Prediction) compression technology.
This technology allows for much great voice quality in the same number
of bits as the older Full Rate CODEC. The older technology was called
LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both
operate at 13 kilobits.(but you take up more space on the network, so
they can charge you more) - Talk-time is reduced with about 5%

Nokia E-Series Secret Codes

Check software version and the release number of your device:
*#0000#

See WLAN MAC address:
*#62209526#

See Bluetooth MAC address:
*#2820#

To hard reset and restore to factory settings:
*#7370# (default lock code is 12345)

See IMEI (International Mobile Equipment Identity) number:
*#06#

Check number where calls are diverted:
*#61#

To display your phone's life timer, type: #92702689#


Please use the following two codes with extreme care:

  • To soft reset the phone and reset phone settings type: *#7780#
  • To
    hard reset and completely erase all data on the phone and restore it to
    factory settings, type *#7370#. You'll be asked for a lock code. The
    default Nokia lock code is 12345.





Sim Clock Stopping

*#746025625#
[*#sim0clock#]
Checks
if the sim clock can be stopped. Sim clock stop is a kind of stand-by
mode which will save battery time. This code doesn't work with software
version 4.59.
It will tell you if it can be stopped or not.


Warrenty Menu

*#92702689# takes you to a secret menu with 6 choices:
[*#war0anty#]
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997).
3. Displays (if there) the date where the phone was purchased (MMYY).
4. Displays the date of the last repairment - if found (0000).
5. Makes you capable of transferring user data if you have the gear for it.
6.
Shows how long the phone has been used to talk. This counter is not
reset by when you "clear timers" like the counters in the call register.


Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx
1. Insert SIM card of different provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec.
Then release it and the phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN#


Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^)
The
settings for radar speed traps detector. Your Nokia cell phone can be
programmed to pick up radar speed traps, when programmed your cell phone
picks up the radar and alerts you on the message alert tone. ( Doesn't
work with Nokia 7110! )
1. Enter your menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8.
Clear back to normal, within a few seconds your phone will display a
radar sign with five zero's next to it. It is now activated.
Unfortunately
only Nokia phones have this function. The Cell Phone info display needs
to be de-activated. Settings -> Phone Settings -> Cell Info
display. Each time you turn off your phone, or even each time you loose
contact with your carrier, you'll have to activate it again... It is
done using steps 1 through 5 above, but the number (00000) will be
already on the field as a default.

The James Bond Trick



If
you short-circuit the left middle and right pins on the bottom of the
phone with all connections touching each other, the Nokia software
hangs! The profile "Headset" will be activated. Before you do this just
activate the "Automatic Answer" in the headset profile and set the
ringing volume to "Mute". Now you can use your phone for checking out
what people are talking about in a room. Just place it under a table in a
room and call it. The phone receives the call without ringing and you
can listen to what people are saying! Network Monitor
There is a
hidden menu inside your Nokia phone. If you want to activate it, you'll
have to re-program some chips inside of your phone.

Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
Take apart the phone.
De-solder the EEPROM (ATMEL AT 24C64)
Read out the data with an EEPROM programmer and save it to a file (Backup)
If you have v.33 or v4.73, change the address "03B8" from "00" to "FF"
If you have v5.24 then change the address "0378" from "00" to "FF"
Write the new data to the EEPROM and solder it back to the phone
Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information:
Carrier
number, MS RX Level in DBM, Received signal quality, MS TX power level,
C1 (Path loss criterion, used for cell selection and reselection). The
range is -99 to 99, RTL (Radio link timeout), Timeslot, Indication of
the transmitter status, Information on the Network parameters, TMSI
(Temporary Mobile Subscriber Identity), Cell identification (Cell ID,
Number of cells being used), MCC (Mobile country code), MCN (Mobile
network code), LAC (Location area code), Ciphering (On/Off), Hopping
(On/Off), DTX (On/Off), Discard cell barred information.


Game Hacking with Blizzard



Get
the file called the 'BlizzardN-GAGE.SIS' from IRC get in #mediaplace on
Efnet (note: Downloading cracked/Hacked games is illegal unless you
already own a copy of game)
The Blizzard Nokia N-Gage Installer.
1. Unpack Blizzard.sis file that you get from mIRC
2. Transfer the .sis file to your N-Gage
3. Get the .blz (N-gage ROM) from mIRC
4. copy the file to the root dir of your MMC (16MB MMC)Multimedia Card
5. Use the Blizzard application to unpack the .blz file
6. After unpacking the sonic icon should appeared in the MENU
7. Clicked sonic icon and it should work !



List of compatible games for the 3650,6600 and the N-gage that work:
[3650]
SonicN (v.2.5+)
Puyo Pop (v.2.5+)

[6600]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater

[N-Gage]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater

GSM Network Services Command Strings
When
various network functions are selected via the cellphone's menu using
the keypad, the cellphone automatically generates the corresponding GSM
network command string and transmits it to the network. These commands
can however be manually entered via the keypad.



Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
©️ Call button



Once
each command has been entered, if it is a network command (as opposed
to a local handset command) it must be transmitted to the network by
pressing the YES (receiver) key which acts as an enter key - this is
represented here with the ©️ character. Always enter numbers in full
international format +CountryAreaNumber ( e.g. +447712345678).

Command Description Command String
Security
Change call barring code **03*OldCode*NewCode*NewCode#©️
Change call barring code **03*330*OldCode*NewCode*NewCode#©️
Change PIN code **04*OldPIN*NewPIN*NewPIN#©️
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©️
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©️
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©️
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©️
Set all configured call diversions to number and activate **004*number#©️
De-register all configured call diversions (no answer, not reachable, busy) ##004#©️
Unconditionally divert all calls to number and activate **21*number#©️
Activate unconditionally divert all calls *21#©️
De-register unconditionally divert all calls ##21#©️
Deactivate unconditionally divert all calls #21#©️
Check status of unconditionally divert all calls *#21#©️
Divert on no answer to number and activate **61*number#©️
Activate divert on no answer *61#©️
De-register divert on no answer ##61#©️
Deactivate divert on no answer #61#©️
Check status of divert on no answer *#61#©️
Divert on not reachable to number and activate **62*number#©️
Activate divert on not reachable *62#©️
De-register divert on not reachable ##62#©️
Deactivate divert on not reachable #62#©️
Check status of divert on not reachable *#62#©️
Divert on busy to number and activate /td> **67*number#©️<
Activate divert on busy *67#©️
De-register divert on busy ##67#©️
Deactivate divert on busy #67#©️
Check status of divert on busy *#67#©️
Change
number of seconds of ringing for the given service before diverting a
call (such as on no answer). Seconds must be a value from 5 to 30.
De-registering the same divert will also delete this change!
**service*number**seconds#©️ (Service numbers, see below)
Call barring
Activate barr all outgoing calls (see Security to set code) **33*code#©️
Deactivate barr all outgoing calls #33*code#©️
Check status of barr all outgoing calls *#33#©️
Activate barr all calls **330*code#©️
Deactivate barr all calls #330*code#©️
Check status of barr all calls /td> *#330*code#©️<
Activate barr all outgoing international calls **331*code#©️
Deactivate barr all outgoing international calls #331*code#©️
Check status of barr all outgoing international calls *#331#©️
Activate barr all outgoing international calls except to home country **332*code#©️
Deactivate barr all outgoing international calls except to home country #332*code#©️
Check status of barr all outgoing international calls except to home country *#332#©️
Activate barr all outgoing calls **333*code#©️
Deactivate barr all outgoing calls #333*code#©️
Check status of barr all outgoing calls *#333#©️
Activate barr all incoming calls **35*code#©️
Deactivate barr all incoming calls #35*code#©️
Check status of barr all incoming calls *#35#©️
Activate barr all incoming calls when roaming **351*code#©️
Deactivate barr all incoming calls when roaming #351*code#©️
Check status of barr all incoming calls when roaming *#351#©️
Activate barr all incoming calls **353*code#©️
Deactivate barr all incoming calls #353*code#©️
Check status of barr all incoming calls *#353#©️
Call waiting
Activate call waiting *43*#©️
Deactivate call waiting #43##©️
Check status of call waiting *#43#©️
Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#©️
Deactivate CLIP ##30#©️
Check status of CLIP *#30#©️
CLIR: Presentation of one's own number to the to the called party
Activate CLIR **31#©️
Activate CLIR for the actual call *31#number©️
Deactivate CLIR ##31#©️
Deactivate CLIR for the actual call #31#number©️
Check status of CLIR *#31#©️
COLP: Presentation of the actual number reached (if number called was diverted to another number
Activate COLP *76#©️
Deactivate COLP #76#©️
Check status of COLP *#76#©️
COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone)
Activate COLR *77#©️
Deactivate COLR #77#©️
Check status of COLR *#77#©️


Cellphone Services
10 All types of cellphone services
11 Speech service
12 Data service
13 Fax
14 Datex-J
15 Teletex
16 Short message service (SMS)
18 All data services without SMS
19 All cellphone services without SMS


Carrier Services
20 All services
21 All asynchronous services
22 All synchronous services
23 3.1kHz services
24 Synchronous point-to-point connections including PAD's (all synchronous data services)
25 Asynchronous point-to-point connections including PAD's (all asynchronous data services)
26 Data packet sending including PAD's (all synchronous data packet services)
27 Services with PAD-share
29 Digital connection with 12kbps


GSM Network Service Codes
Note that at present only the following service codes are in use:
11 Speech
13 fax
25 data


Cell Broadcast
While
Short Message Service (SMS) can be configured as a personal service,
Cell Broadcast is a general service which is designed for subscribers of
a specific cell or topic. For example, a subscriber to cell 050 in
England will receive information on the GSM tower currently being used
by their phone. This new concept brings a whole new meaning to the term
mobile communications as the phone is now able to receive information
such as share prices or weather updates without the need of data cards
and computers. At present the following message types exist (note: this
may vary from carrier to carrier and some carriers may charge for this
service):


Code Title
000 Index
010 Flashes
020 Hospitals
022 Doctors
024 Pharmacy
030 Long Distant Road Reports
032 Local Road Reports
034 Taxis
040 Weather
050 District
052 Network Information
054 Operator Services
056 Directory Inquiries (national)
057 Directory Inquiries (international)
058 Customer Care (national)
059 Customer Care (international)


In
the future one will be able to control each individual call by use of
the following service codes. To do this the user has to insert the
service code in front of the last # in the MMI command above.



Or More


Secret Codes for some Nokia models
Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Nokia 9110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version: v5.02 (26-08-99)RAE-2

Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: 4.77 25-01-00 NSE-5 - EFR and half rate codes do not work with these version.

V 4.76 13-01-00 NSE-5
V 4.75 07-01-00 NSE-5
V 4.73 15.11.99 NSE-5

Nokia 6190

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#6190# shows the SW version.
*#92772689# (after removing the analog module) shows service menu.
*3001#12345[OK] to enter test mode.
*#639# to change NAM.

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689# for checking ISDN number.
*3001#12345# for field test mode and nam selection and some other stuff...
*#9999# shows the SW version



Nokia 3210 Secret Codes
Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]
Checks
if the sim clock can be stopped. Sim clock stop is a kind of stand-by
mode which will save battery time. This code doesn't work with software
version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: V 5.02 NSE-8/9

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart

Enhanced
Full Rate will give you much better sound quality when you enable it.
The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP
(Algebraic Code Excitation Linear Prediction) compression technology.
This technology allows for much great voice quality in the same number
of bits as the older Full Rate CODEC. The older technology was called
LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both
operate at 13 kilobits.(but you take up more space on the network, so
they can charge you more) - Talk-time is reduced by about 5% when using
the ERF option.
Harsh Gupta








Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow
Back to top Go down
View user profile http://gsm-mobile.forumotion.com
 
Nokia All Codes
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» So who is good with option codes...
» nokia c1-00 lcd display ways white light blank problem solution ways jumpers
» nokia X3-02 keypad 1,4,7, done....
» Nokia 1280 headset not detected done..!
» Friend Codes & Friend Safari

Permissions in this forum:You cannot reply to topics in this forum
 :: Unlocking Codes & Sim Cloning :: Unlocking Codes-
Jump to: